Cence Automatic Decapping Centrifuge CTK80

Vacuum blood collection tubes are widely used in blood collection for hospitals,caps has to be opened by hand after centrigation,it affects the centrifugation efficiency. CTK80 and CTK120C Automatic Decapping Centrifuge successfully solved the problem of caps,it is the right choice of the hospital.

Product Features

1. Applied to blood collection tubes and more than 90% tubes can be automatically decapped.

2. Applied to 100mm and 75mm length tubes.

3. LCD display for easier use.Driven by AC frequency-conversion motor,with functions of speed control,acceleration and deceleration.

4. RCF value can be automatically calculated.

5. Special damping set releasing the vibration.

6. Electronica interlock for better safety.

Adaptor Operation Methods

The adaptor is used for 100mm length and 75mm length vacuum blood collection tube.

1. If you need separate two kinds of vacuum blood collection tube with different length at the same time, must to guarantee the adaptor layers in symmetrical position is the same, and same length tubes should be placed symmetrically in even number (see figure 1).

2.When using 100mm length vacuum blood collection tube, must assemble all three middle-plates and top plate(decapping plate)in place (see left picture in figure 2).

3. when using 75mm length vacuum blood collection tube, take off the top-plate at first, and then remove one layer middle-plate,only use two layers and at last reassemble the top-plate in place.

4. After centrifugation is finished, just take off the top-plate, the vacuum blood collection tube and the cap would be separated automatically. (see figure 3 and 4)

Technical Parameters